FREQUENTLY ASKED QUESTIONS

We are pleased to provide answers to some of the most Frequently Asked Questions (FAQ’s) on our wide range of flooring products. Click on a category below to view common questions and answers. If you are unable to find the answer you’re looking for, please submit your question on the form below and a Quickstyle Customer Service representative will respond promptly.

 

 

Quickstyle vinyl flooring can be installed over most existing floor coverings (except for carpet) in any room of your home. For best results, we recommend installing over plywood. Most importantly, the sub-floor must be level, dry, clean and firm.
Please refer to the installation instructions found in every box of product or download instructions found on each flooring product page.
It doesn't really expand. We recommend leaving a small expansion gap around the perimeter for some extreme conditions.
Depending on your needs, a basic foam may be sufficient, If any additional benefits are required we suggest speaking with your flooring specialist to find an option best suited for your needs.
Yes, please comply with special instructions which can be obtained from the manufacturer of your radiant heating systems.
Yes. One of vinyl amazing features is the ability to withstand most weather conditions.
The Although Quickstyle vinyl flooring is waterproof, it will not prevent moisture from penetrating the joints, so no it can't be installed in a shower.
Lay dirt-absorbing mats in high traffic areas, (such as entrance halls and hallways). Apply felt pads underneath furniture. For office  chairs, use a chair mat to protect the floor..
Simply clean your Quickstyle vinyl floor with a soft broom, a lightly dampened mop or a vacuum cleaner. Wipe off footmarks and  dirt with a wrung-out (slightly dampened), cloth. Do not attempt to clean your Quickstyle Floating floor with wax, polish, or scouring  materials. Stubborn stains can be removed with special stain removers. .
You can! For furniture, we recommend that you usefelt furniture pads under legs to prevent scratching the flooring surface. Never use rubber, as rubber can stain vinyle flooring.
Please call us at: 1-800-387-8953 and we’ll be happy to direct you to your nearest Quickstyle dealer.
Engineered wood is composed of a thin natural hardwood layer that has been applied to a plywood core. While solid wood naturally expands and contracts depending on the temperature and humidity levels, the multi-layered construction of engineered wood flooring ensures superior dimensional stability. Engineered wood flooring is unique in that it can be installed floating over concrete slabs using the traditional gluing with tongue and groove or “clic” methods. Combined with a sound-attenuating underlayment, engineered hardwood flooring is the ideal product for condominium environments in high-rise buildings.
Hardwood flooring is scratch resistant. However, no flooring is completely scratch proof. To help minimize damage to your floor, proper floor maintenance such as using felt pads, sweeping your floor regularly etc. will help prolong the life and beauty of your floors. For further information, please refer to the FloorCare page of our website.
Please refer to the installation instructions found in every box of product or download instructions found on each flooring product page.
Flooring must be allowed to acclimate to the temperature of the room in which it will be installed. The unopened packages should be placed in the room for a minimum of 72 hours prior to installation at a room temperature of 19°C to 22°C and a relative humidity of 50%.
High quality wood fillers are commonly available and are recommended to repair chips or gauges in your floor.
An occasional DAMP mopping with a neutral floor cleaner is generally all that is required to maintain your hardwood floors. Do not use soaps or detergents as they may leave a film on the floor. Quickstyle hardwood flooring should never be waxed. Always remember, water and wood flooring don’t mix!Minimize water exposure to your hardwood flooring. Wipe up spills as soon as possible. Wood flooring is a natural product, which expands and contracts as moisture levels change. For more detailed information, please see the Floor Care section of our website.
Please send us a message on the form below or call us at: 1-800-387-8953 and we’ll be happy to direct you to your nearest Quickstyle dealer.
Glueless laminate flooring can be installed over most existing floor coverings (except for carpet) in any room of your home except in very damp or wet areas (eg. bathroom).
Please refer to the installation instructions found in every box of product or download instructions found on each flooring product page.
Flooring must be allowed to acclimate to the temperature of the room in which it will be installed. The unopened packages should be placed in the room for a minimum of 48 hours prior to installation at a room temperature of 19°C to 22°C and a relative humidity of 50%.
An expansion gap of 1/2’’ – 9/16’’ (12-15mm) must be left around the perimeter of the room and around all heating pipes and other obstructions. A baseboard and quarter round molding will cover this gap. In large surface areas (over 875 square ft. (82 m2), the cork flooring must be separated by an expansion gap that will be covered by a T profile. This allows the floor to expand and contract with changes in temperature and relative humidity. NEVER glue or nail your cork flooring to your subfloor.
Yes, as long as relative humidity in your basement is controlled and you install the appropriate underlayment .
There is no need to wait. Because there’s no glue to dry, feel free to walk, or move furniture back on the floor immediately after installation.
Yes you can install heavy objects on laminate flooring. Please ensure to follow all recommended installation procedures.
An occasional DAMP mopping with a neutral floor cleaner is generally all that is required to maintain your hardwood floors. Do not use soaps or detergents as they may leave a film on the floor. Quickstyle hardwood flooring should never be waxed. Always remember, water and wood flooring don’t mix!Minimize water exposure to your hardwood flooring. Wipe up spills as soon as possible. Wood flooring is a natural product, which expands and contracts as moisture levels change. For more detailed information, please see the Floor Care section of our website.
Laminate flooring is very scratch resistant. However, no flooring is completely scratch proof. To help minimize damage to your floor, proper floor maintenance such as using felt pads, sweeping your floor regularly etc. will help prolong the life and beauty of your floors. For further information, please refer to the Floor Care section of our website.
Footprints or streaks are most often associated with cleaning products leaving residue on laminate flooring. Proper maintenance using a Laminate floor cleaner will solve this issue.
The sheen on laminate flooring panels is a manufactured characteristic of the product and cannot be modified.
No. Since laminate flooring is a composite material, refinishing is not possible.
Minor chip repairs can be corrected with the use of our colour-matched ColorFill kit. For full panel replacement, please refer to the Floor Care section of our website.
Yes, as long as your subfloor is insulated according to your local building code and that a minimum expansion gap of ½’’ (12mm) is respected near all walls and around heating pipes and thresholds. Even though our floors are designed to be glueless, applications such as this require that all planks be glued together at the seams and a vapour barrier installed under the floor.
Call us at: 1-800-387-8953 and we’ll be happy to direct you to your nearest Quickstyle dealer.
Engineered wood is composed of a thin natural hardwood layer that has been applied to a plywood core. While solid wood naturally expands and contracts depending on the temperature and humidity levels, the multi-layered construction of engineered wood flooring ensures superior dimensional stability. Engineered wood flooring is unique in that it can be installed floating over concrete slabs using the traditional gluing with tongue and groove or “clic” methods. Combined with a sound-attenuating underlayment, engineered hardwood flooring is the ideal product for condominium environments in high-rise buildings.
Please refer to the installation instructions found in every box of product or download instructions found on each flooring product page.
Flooring must be allowed to acclimate to the temperature of the room in which it will be installed. The unopened packages should be placed in the room for a minimum of 72 hours prior to installation at a room temperature of 19°C to 22°C and a relative humidity of 50%.
An occasional DAMP mopping with a neutral floor cleaner is generally all that is required to maintain your hardwood floors. Do not use soaps or detergents as they may leave a film on the floor.Quickstyle hardwood flooring should never be waxed. Always remember, water and wood flooring don’t mix!Minimize water exposure to your hardwood flooring. Wipe up spills as soon as possible. Wood flooring is a natural product, which expands and contracts as moisture levels change. For more detailed information, please see the Floor Care section of our website.
High quality wood fillers are commonly available and are recommended to repair chips or gauges in your floor.
Hardwood flooring is scratch resistant. However, no flooring is completely scratch proof. To help minimize damage to your floor, proper floor maintenance such as using felt pads, sweeping your floor regularly etc. will help prolong the life and beauty of your floors. For further information, please refer to the FloorCare page of our website.
Call us at: 1-800-387-8953 and we’ll be happy to direct you to your nearest quickstyle dealer.
1. Be sure the sub-floor surface is clean and dry.*
2. Roll QuietWalk Floating Floor Pad over the subfloor with the vapour barrier film facing up to allow the floating wood to slide easily over the surface.
3. The perimeter edges of QuietWalk TM need to be ½ in to ¾ in (13-20 mm) away from the wall.
4. Padding materials need to be butted together flush at the seams.Peel the protective backing off of the tape strip from one section and press the overlap of vapour barrier from the next section onto the strip for an instant seal.
*In geographic areas where concrete slabs are subject to excessive moisture, a calcium chloride moisture test is recommended. Vapour emission readings in excess of 3 lbs. per 1,000 ft2 (1,46 kg per 100 m2) in 24 hours will require additional protection such as a concrete sealant or polyethylene sheeting.
NOTE: All rolls of QuietWalk TM are cut to a minimum of 100 ft2 (9,3 m2). The average thickness of QuietWalk TM is 0.125’’ (3 mm). The average weight of a roll of 100 ft2 is 13.8 lbs. (6,2 kg.). Due to the nature of our manufacturing process and the use of recycled materials, the pad thickness may vary +/- 0.02’’ (0,5 mm).
Actual weight of each roll may also vary +/- 2 lbs. (0,9 kg.). While it may appear that one roll is slightly larger than another, we guarantee this variance DOES NOT affect the coverage area nor the sound absorption benefits of the product. Please refer to the installation instructions found in every box of product or download instructions found on the underlayment page.